Product physical properties 
 Chemical composition: polymer interface polymer 
 Density (g/cm3): 0.88 
 Flash Point: about 12 ℃ 
 Appearance: clear and transparent liquid 
 Product Use 
 ★ PE bottom water specifically used in PE plastic processing to enhance the coating adhesion to the substrate of special additives. 
 ★ PE products widely used in many aspects of home electrical appliances, commodity, advanced toys, in order to make products to achieve a high level in appearance, surface finishing, and PE plastic surface, low-polarity, often adhesion poor, require special handling. Such as: Flame, Corona, corrosion, etc., but the above methods are complicated, in order to reduce the process, people are often drawn to the PE at the end the water sprayed on the PE substrate, and then brushing the other coatings is an effective method , and is convenient, economic, provincial, provincial and paint method. 
 Use 
 1, PE the bottom water can be sprayed directly in the PE parts, in general, as long as the cross of PE after construction of the gun can be, in the indoor air dry for about 15min and then spray paint. 
 For small or complex shape PE plastic workpiece directly immersed in the water of the PE will be in the indoor air dry for about 20min after removing the PE workpiece spray paint. 
 3, after spraying the PE, such as at 80 ℃ bake 30min, coating adhesion to the substrate can be better. 
 Packaging Specifications 
 18 liters / barrel 
 25kg / drum 


 [The product of PE substrate adhesion enhance treated water, improve the adhesion of the coating on the untreated PE plastic, can improve the water resistance of the coatings, gasoline resistance, heat resistance. 】 
 Appearance: colorless and transparent. 】 
 Price: 35/KG; 25KG / barrel since. (Excluding freight)